dmesg - ARMv8 Cortex-A72
Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Linux version 5.8.0-1010-raspi (buildd@bos02-arm64-070) (gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #13-Ubuntu SMP PREEMPT Wed Dec 9 17:14:07 UTC 2020 (Ubuntu 5.8.0-1010.13-raspi 5.8.17)
Machine model: Raspberry Pi 4 Model B Rev 1.2
efi: UEFI not found.
Reserved memory: created CMA memory pool at 0x000000001d000000, size 256 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Zone ranges:
DMA [mem 0x0000000000000000-0x000000003fffffff]
DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x0000000037efffff]
node 0: [mem 0x0000000040000000-0x00000000fbffffff]
Zeroed struct page in unavailable ranges: 256 pages
Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
On node 0 totalpages: 999168
DMA zone: 3580 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 229120 pages, LIFO batch:63
DMA32 zone: 12032 pages used for memmap
DMA32 zone: 770048 pages, LIFO batch:63
percpu: Embedded 32 pages/cpu s93528 r8192 d29352 u131072
pcpu-alloc: s93528 r8192 d29352 u131072 alloc=32*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Detected PIPT I-cache on CPU0
CPU features: detected: EL2 vector hardening
CPU features: kernel page table isolation forced ON by KASLR
CPU features: detected: Kernel page table isolation (KPTI)
ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Built 1 zonelists, mobility grouping on. Total pages: 983556
Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:78:48:D3 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc quiet splash
Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x33f00000-0x37f00000] (64MB)
Memory: 3531980K/3996672K available (12988K kernel code, 1422K rwdata, 4936K rodata, 4288K init, 1085K bss, 202548K reserved, 262144K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x34/0x2fc with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 42678 entries in 167 pages
ftrace: allocated 167 pages with 5 groups
rcu: Preemptible hierarchical RCU implementation.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GIC: Using split EOI/Deactivate mode
arch_timer: cp15 timer(s) running at 54.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Console: colour dummy device 80x25
printk: console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Disabling memory control group subsystem
rcu: Hierarchical SRCU implementation.
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected PIPT I-cache on CPU1
CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Detected PIPT I-cache on CPU2
CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
Detected PIPT I-cache on CPU3
CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: CRC32 instructions
CPU features: detected: 32-bit EL1 Support
CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Enabled cp15_barrier support
Enabled setend support
KASLR enabled
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
DMI not present or invalid.
NET: Registered protocol family 16
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.092:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 32768 entries
bcm2835-mbox fe00b880.mailbox: mailbox enabled
raspberrypi-firmware soc:firmware: Attached to firmware from 2020-09-02T21:14:24, variant start_x
raspberrypi-firmware soc:firmware: Firmware hash is 4439d2aaa6c376a2d1ef4402f142e1cf4de37c43
bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
simple-framebuffer 3e2cb000.framebuffer: framebuffer at 0x3e2cb000, 0x7f8000 bytes, mapped to 0x(____ptrval____)
simple-framebuffer 3e2cb000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
Console: switching to colour frame buffer device 240x67
simple-framebuffer 3e2cb000.framebuffer: fb0: simplefb registered!
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31480K
hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
kvm [1]: IPA Size Limit: 44bits
kvm [1]: vgic interrupt IRQ1
kvm [1]: Hyp mode initialized successfully
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=46 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3cold
pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
pcieport 0000:00:00.0: enabling device (0000 -> 0002)
pcieport 0000:00:00.0: PME: Signaling with IRQ 41
pcieport 0000:00:00.0: AER: enabled with IRQ 41
pci 0000:01:00.0: VL805 firmware version 000138a1
pci 0000:01:00.0: enabling device (0000 -> 0002)
iproc-rng200 fe104000.rng: hwrng registered
vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
cacheinfo: Unable to detect cache hierarchy for CPU 0
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
libphy: bcmgenet MII bus: probed
unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
PPP generic driver version 2.4.2
usbcore: registered new interface driver lan78xx
usbcore: registered new interface driver smsc95xx
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
dwc_otg: FIQ enabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split-transaction FSM enabled
Module dwc_common_port init
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
RPL Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: bd9a8a6ff8c95d205cdb1adba268b4fe131303b3'
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
cryptd: max_cpu_qlen set to 1000
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
of_cfs_init
of_cfs_init: OK
test 0 [ ok ]
test 1 [ ok ]
test 2 [ ok ]
random: fast init done
Freeing unused kernel memory: 4288K
mmc1: new high speed SDIO card at address 0001
Checked W+X mappings: passed, no W+X pages found
Run /init as init process
with arguments:
/init
fixrtc
splash
with environment:
HOME=/
TERM=linux
snd_pcm_dmaengine: Unknown symbol snd_pcm_format_physical_width (err -2)
snd_pcm_dmaengine: Unknown symbol snd_pcm_hw_constraint_integer (err -2)
snd_pcm_dmaengine: Unknown symbol snd_pcm_period_elapsed (err -2)
usb_phy_generic phy: supply vcc not found, using dummy regulator
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000004000000890
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.0-1010-raspi xhci-hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.0-1010-raspi xhci-hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
[drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: Ugreen Storage Device
usb 2-2: Manufacturer: Ugreen
usb 2-2: SerialNumber: 02200702622B
usbcore: registered new interface driver usb-storage
scsi host0: uas
usbcore: registered new interface driver uas
scsi 0:0:0:0: Direct-Access CT240BX5 00SSD1 0 PQ: 0 ANSI: 6
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.4: new high-speed USB device number 3 using xhci_hcd
usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB2.0 Hub
usb 1-1.4: Manufacturer: GenesysLogic
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
raid6: neonx8 gen() 4389 MB/s
raid6: neonx8 xor() 3129 MB/s
usb 1-1.4.2: new full-speed USB device number 4 using xhci_hcd
raid6: neonx4 gen() 4620 MB/s
raid6: neonx4 xor() 3283 MB/s
usb 1-1.4.2: New USB device found, idVendor=0d8c, idProduct=0012, bcdDevice= 1.00
usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4.2: Product: USB Audio Device
usb 1-1.4.2: Manufacturer: C-Media Electronics Inc.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: C-Media Electronics Inc. USB Audio Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.3/0003:0D8C:0012.0001/input/input0
raid6: neonx2 gen() 3948 MB/s
usb 1-1.4.3: new low-speed USB device number 5 using xhci_hcd
hid-generic 0003:0D8C:0012.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:01:00.0-1.4.2/input3
raid6: neonx2 xor() 2988 MB/s
raid6: neonx1 gen() 2982 MB/s
raid6: neonx1 xor() 2316 MB/s
usb 1-1.4.3: New USB device found, idVendor=03f0, idProduct=134a, bcdDevice= 1.00
usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4.3: Product: HP USB Optical Mouse
usb 1-1.4.3: Manufacturer: PixArt
input: PixArt HP USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/0003:03F0:134A.0002/input/input1
hid-generic 0003:03F0:134A.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:01:00.0-1.4.3/input0
raid6: int64x8 gen() 2539 MB/s
raid6: int64x8 xor() 1400 MB/s
usb 1-1.4.4: new low-speed USB device number 6 using xhci_hcd
raid6: int64x4 gen() 2582 MB/s
raid6: int64x4 xor() 1415 MB/s
usb 1-1.4.4: New USB device found, idVendor=03f0, idProduct=034a, bcdDevice= 1.21
usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4.4: Product: HP Elite USB Keyboard
usb 1-1.4.4: Manufacturer: Chicony
raid6: int64x2 gen() 2393 MB/s
input: Chicony HP Elite USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/0003:03F0:034A.0003/input/input2
raid6: int64x2 xor() 1269 MB/s
hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:01:00.0-1.4.4/input0
input: Chicony HP Elite USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/0003:03F0:034A.0004/input/input3
raid6: int64x1 gen() 1826 MB/s
raid6: int64x1 xor() 948 MB/s
raid6: using algorithm neonx4 gen() 4620 MB/s
raid6: .... xor() 3283 MB/s, rmw enabled
raid6: using neon recovery algorithm
input: Chicony HP Elite USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/0003:03F0:034A.0004/input/input4
hid-generic 0003:03F0:034A.0004: input,hidraw3: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:01:00.0-1.4.4/input1
xor: measuring software checksum speed
8regs : 5983.000 MB/sec
32regs : 6824.000 MB/sec
arm64_neon: 6106.000 MB/sec
xor: using function: 32regs (6824.000 MB/sec)
Btrfs loaded, crc32c=crc32c-generic
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: System time before build time, advancing clock.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 246.6-1ubuntu1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.service:12: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dgrowfs.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Condition check resulted in Huge Pages File System being skipped.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
EXT4-fs (sda2): re-mounted. Opts: (null)
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Finished Remount Root and Kernel File Systems.
lp: driver loaded but no devices found
systemd[1]: Activating swap /swapfile...
systemd[1]: Starting Grow File System on /...
ppdev: user-space parallel port driver
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Finished Load Kernel Modules.
EXT4-fs (sda2): resizing filesystem from 58541969 to 58541969 blocks
Adding 1048572k swap on /swapfile. Priority:-2 extents:3 across:5483584k SSFS
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Activated swap /swapfile.
systemd[1]: Finished Grow File System on /.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Reached target Swap.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Started Journal Service.
rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
vc_sm_cma: module verification failed: signature and/or required key missing - tainting kernel
bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[vc_sm_connected_init]: start
[vc_sm_connected_init]: installed successfully
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_audio bcm2835_audio: card created with 4 channels
bcm2835_audio bcm2835_audio: card created with 4 channels
vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
checking generic (3e2cb000 7f8000) vs hw (0 ffffffffffffffff)
fb0: switching to vc4drmfb from simple
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
brcmfmac: F1 signature read @0x18000000=0x15264345
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
usbcore: registered new interface driver brcmfmac
Console: switching to colour frame buffer device 240x67
vc4-drm gpu: fb0: vc4drmfb frame buffer device
usbcore: registered new interface driver snd-usb-audio
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea
bcm2835-codec bcm2835-codec: Device registered as /dev/video10
bcm2835-codec bcm2835-codec: Loaded V4L2 decode
bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
bcm2835-isp bcm2835-isp: Register output node 0 with media controller
bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
bcm2835-codec bcm2835-codec: Device registered as /dev/video11
bcm2835-codec bcm2835-codec: Loaded V4L2 encode
bcm2835-codec bcm2835-codec: Device registered as /dev/video12
bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
random: crng init done
audit: type=1400 audit(1600975635.299:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=644 comm="apparmor_parser"
audit: type=1400 audit(1600975635.311:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=649 comm="apparmor_parser"
audit: type=1400 audit(1600975635.311:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=649 comm="apparmor_parser"
audit: type=1400 audit(1600975635.311:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=649 comm="apparmor_parser"
audit: type=1400 audit(1600975635.319:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=648 comm="apparmor_parser"
audit: type=1400 audit(1600975635.319:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=648 comm="apparmor_parser"
audit: type=1400 audit(1600975635.327:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=647 comm="apparmor_parser"
audit: type=1400 audit(1600975635.327:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=647 comm="apparmor_parser"
audit: type=1400 audit(1600975635.327:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=647 comm="apparmor_parser"
audit: type=1400 audit(1600975635.327:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=647 comm="apparmor_parser"
bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
bcmgenet fd580000.ethernet eth0: Link is Down
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered protocol family 38
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
usb 1-1.4.2: USB disconnect, device number 4
v3d fec00000.v3d: MMU error from client CLE (4) at 0x199e1000, pte invalid
usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
usb 2-1: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1: Product: Ugreen Storage Device
usb 2-1: Manufacturer: Ugreen
usb 2-1: SerialNumber: 092009022211
scsi host1: uas
scsi 1:0:0:0: Direct-Access WDC WDS 100T2B0A-00SM50 0 PQ: 0 ANSI: 6
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Optimal transfer size 33553920 bytes
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
usb 2-1: USB disconnect, device number 3
INFO: task Xorg:902 blocked for more than 120 seconds.
Tainted: G C E 5.8.0-1010-raspi #13-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Xorg D 0 902 900 0x00000001
Call trace:
__switch_to+0xfc/0x12c
__schedule+0x2a8/0x72c
schedule+0x84/0x120
schedule_preempt_disabled+0x30/0x4c
__mutex_lock.constprop.0+0x17c/0x5a0
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x54/0x60
clk_prepare_lock+0x4c/0xb0
clk_set_rate+0x30/0x18c
v3d_clock_up_get+0x6c/0xa0 [v3d]
v3d_job_init+0xc4/0xe0 [v3d]
v3d_submit_cl_ioctl+0xac/0x740 [v3d]
drm_ioctl_kernel+0xd0/0x120 [drm]
drm_ioctl+0x1e8/0x460 [drm]
ksys_ioctl+0xb4/0xf4
__arm64_sys_ioctl+0x2c/0xbc
el0_svc_common.constprop.0+0x84/0x200
do_el0_svc+0x30/0xa0
el0_svc+0x18/0x50
el0_sync_handler+0x98/0x354
el0_sync+0x17c/0x180
INFO: task kworker/2:0:64112 blocked for more than 120 seconds.
Tainted: G C E 5.8.0-1010-raspi #13-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/2:0 D 0 64112 2 0x00000028
Workqueue: events dbs_work_handler
Call trace:
__switch_to+0xfc/0x12c
__schedule+0x2a8/0x72c
schedule+0x84/0x120
schedule_timeout+0x88/0x100
wait_for_completion_timeout+0x8c/0x110
mbox_send_message+0xac/0x130
rpi_firmware_transaction+0x6c/0x110
rpi_firmware_property_list+0xc4/0x184
rpi_firmware_property+0x7c/0x120
raspberrypi_fw_get_rate+0x50/0x8c
clk_recalc+0x40/0xac
__clk_recalc_rates+0x40/0xb0
clk_get_rate+0x80/0x8c
dev_pm_opp_set_rate+0xa8/0x620
set_target+0x4c/0x94
__target_index+0xd0/0x1e4
__cpufreq_driver_target+0x108/0x13c
od_update+0xe8/0x130
od_dbs_update+0x54/0xb4
dbs_work_handler+0x4c/0x8c
process_one_work+0x1d8/0x4a0
worker_thread+0x74/0x3c0
kthread+0x138/0x14c
ret_from_fork+0x10/0x34
INFO: task kworker/3:0:64147 blocked for more than 120 seconds.
Tainted: G C E 5.8.0-1010-raspi #13-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/3:0 D 0 64147 2 0x00000028
Workqueue: events_freezable mmc_rescan
Call trace:
__switch_to+0xfc/0x12c
__schedule+0x2a8/0x72c
schedule+0x84/0x120
schedule_preempt_disabled+0x30/0x4c
__mutex_lock.constprop.0+0x17c/0x5a0
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x54/0x60
rpi_firmware_transaction+0x58/0x110
rpi_firmware_property_list+0xc4/0x184
rpi_firmware_property+0x7c/0x120
rpi_exp_gpio_set+0x60/0xc0
gpiod_set_raw_value_commit+0x78/0x90
gpiod_set_value_nocheck+0x44/0x84
gpiod_set_value_cansleep+0x4c/0xc0
_regulator_do_disable+0x250/0x260
_regulator_disable+0x138/0x190
regulator_disable+0x48/0x90
mmc_regulator_set_ocr+0xe8/0x100
sdhci_set_power_and_bus_voltage+0x44/0x70
sdhci_set_ios+0xa8/0x690
mmc_set_initial_state+0x9c/0x110
mmc_rescan_try_freq+0xec/0x180
mmc_rescan+0x214/0x304
process_one_work+0x1d8/0x4a0
worker_thread+0x74/0x3c0
kthread+0x138/0x14c
ret_from_fork+0x10/0x34
INFO: task kworker/2:2:64170 blocked for more than 120 seconds.
Tainted: G C E 5.8.0-1010-raspi #13-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/2:2 D 0 64170 2 0x00000028
Workqueue: events get_values_poll [raspberrypi_hwmon]
Call trace:
__switch_to+0xfc/0x12c
__schedule+0x2a8/0x72c
schedule+0x84/0x120
schedule_preempt_disabled+0x30/0x4c
__mutex_lock.constprop.0+0x17c/0x5a0
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x54/0x60
rpi_firmware_transaction+0x58/0x110
rpi_firmware_property_list+0xc4/0x184
rpi_firmware_property+0x7c/0x120
rpi_firmware_get_throttled+0x4c/0x13c [raspberrypi_hwmon]
get_values_poll+0x28/0x50 [raspberrypi_hwmon]
process_one_work+0x1d8/0x4a0
worker_thread+0x74/0x3c0
kthread+0x138/0x14c
ret_from_fork+0x10/0x34
INFO: task Xorg:902 blocked for more than 241 seconds.
Tainted: G C E 5.8.0-1010-raspi #13-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Xorg D 0 902 900 0x00000001
Call trace:
__switch_to+0xfc/0x12c
__schedule+0x2a8/0x72c
schedule+0x84/0x120
schedule_preempt_disabled+0x30/0x4c
__mutex_lock.constprop.0+0x17c/0x5a0
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x54/0x60
clk_prepare_lock+0x4c/0xb0
clk_set_rate+0x30/0x18c
v3d_clock_up_get+0x6c/0xa0 [v3d]
v3d_job_init+0xc4/0xe0 [v3d]
v3d_submit_cl_ioctl+0xac/0x740 [v3d]
drm_ioctl_kernel+0xd0/0x120 [drm]
drm_ioctl+0x1e8/0x460 [drm]
ksys_ioctl+0xb4/0xf4
__arm64_sys_ioctl+0x2c/0xbc
el0_svc_common.constprop.0+0x84/0x200
do_el0_svc+0x30/0xa0
el0_svc+0x18/0x50
el0_sync_handler+0x98/0x354
el0_sync+0x17c/0x180
INFO: task QSGRenderThread:1783 blocked for more than 120 seconds.
Tainted: G C E 5.8.0-1010-raspi #13-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
QSGRenderThread D 0 1783 1 0x00000000
Call trace:
__switch_to+0xfc/0x12c
__schedule+0x2a8/0x72c
schedule+0x84/0x120
schedule_preempt_disabled+0x30/0x4c
__mutex_lock.constprop.0+0x17c/0x5a0
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x54/0x60
v3d_clock_up_get+0x28/0xa0 [v3d]
v3d_job_init+0xc4/0xe0 [v3d]
v3d_submit_cl_ioctl+0xac/0x740 [v3d]
drm_ioctl_kernel+0xd0/0x120 [drm]
drm_ioctl+0x1e8/0x460 [drm]
ksys_ioctl+0xb4/0xf4
__arm64_sys_ioctl+0x2c/0xbc
el0_svc_common.constprop.0+0x84/0x200
do_el0_svc+0x30/0xa0
el0_svc+0x18/0x50
el0_sync_handler+0x98/0x354
el0_sync+0x17c/0x180
INFO: task kworker/2:0:64112 blocked for more than 241 seconds.
Tainted: G C E 5.8.0-1010-raspi #13-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/2:0 D 0 64112 2 0x00000028
Workqueue: events dbs_work_handler
Call trace:
__switch_to+0xfc/0x12c
__schedule+0x2a8/0x72c
schedule+0x84/0x120
schedule_timeout+0x88/0x100
wait_for_completion_timeout+0x8c/0x110
mbox_send_message+0xac/0x130
rpi_firmware_transaction+0x6c/0x110
rpi_firmware_property_list+0xc4/0x184
rpi_firmware_property+0x7c/0x120
raspberrypi_fw_get_rate+0x50/0x8c
clk_recalc+0x40/0xac
__clk_recalc_rates+0x40/0xb0
clk_get_rate+0x80/0x8c
dev_pm_opp_set_rate+0xa8/0x620
set_target+0x4c/0x94
__target_index+0xd0/0x1e4
__cpufreq_driver_target+0x108/0x13c
od_update+0xe8/0x130
od_dbs_update+0x54/0xb4
dbs_work_handler+0x4c/0x8c
process_one_work+0x1d8/0x4a0
worker_thread+0x74/0x3c0
kthread+0x138/0x14c
ret_from_fork+0x10/0x34
INFO: task kworker/3:0:64147 blocked for more than 241 seconds.
Tainted: G C E 5.8.0-1010-raspi #13-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/3:0 D 0 64147 2 0x00000028
Workqueue: events_freezable mmc_rescan
Call trace:
__switch_to+0xfc/0x12c
__schedule+0x2a8/0x72c
schedule+0x84/0x120
schedule_preempt_disabled+0x30/0x4c
__mutex_lock.constprop.0+0x17c/0x5a0
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x54/0x60
rpi_firmware_transaction+0x58/0x110
rpi_firmware_property_list+0xc4/0x184
rpi_firmware_property+0x7c/0x120
rpi_exp_gpio_set+0x60/0xc0
gpiod_set_raw_value_commit+0x78/0x90
gpiod_set_value_nocheck+0x44/0x84
gpiod_set_value_cansleep+0x4c/0xc0
_regulator_do_disable+0x250/0x260
_regulator_disable+0x138/0x190
regulator_disable+0x48/0x90
mmc_regulator_set_ocr+0xe8/0x100
sdhci_set_power_and_bus_voltage+0x44/0x70
sdhci_set_ios+0xa8/0x690
mmc_set_initial_state+0x9c/0x110
mmc_rescan_try_freq+0xec/0x180
mmc_rescan+0x214/0x304
process_one_work+0x1d8/0x4a0
worker_thread+0x74/0x3c0
kthread+0x138/0x14c
ret_from_fork+0x10/0x34
INFO: task kworker/2:2:64170 blocked for more than 241 seconds.
Tainted: G C E 5.8.0-1010-raspi #13-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/2:2 D 0 64170 2 0x00000028
Workqueue: events get_values_poll [raspberrypi_hwmon]
Call trace:
__switch_to+0xfc/0x12c
__schedule+0x2a8/0x72c
schedule+0x84/0x120
schedule_preempt_disabled+0x30/0x4c
__mutex_lock.constprop.0+0x17c/0x5a0
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x54/0x60
rpi_firmware_transaction+0x58/0x110
rpi_firmware_property_list+0xc4/0x184
rpi_firmware_property+0x7c/0x120
rpi_firmware_get_throttled+0x4c/0x13c [raspberrypi_hwmon]
get_values_poll+0x28/0x50 [raspberrypi_hwmon]
process_one_work+0x1d8/0x4a0
worker_thread+0x74/0x3c0
kthread+0x138/0x14c
ret_from_fork+0x10/0x34
INFO: task Xorg:902 blocked for more than 362 seconds.
Tainted: G C E 5.8.0-1010-raspi #13-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Xorg D 0 902 900 0x00000001
Call trace:
__switch_to+0xfc/0x12c
__schedule+0x2a8/0x72c
schedule+0x84/0x120
schedule_preempt_disabled+0x30/0x4c
__mutex_lock.constprop.0+0x17c/0x5a0
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x54/0x60
clk_prepare_lock+0x4c/0xb0
clk_set_rate+0x30/0x18c
v3d_clock_up_get+0x6c/0xa0 [v3d]
v3d_job_init+0xc4/0xe0 [v3d]
v3d_submit_cl_ioctl+0xac/0x740 [v3d]
drm_ioctl_kernel+0xd0/0x120 [drm]
drm_ioctl+0x1e8/0x460 [drm]
ksys_ioctl+0xb4/0xf4
__arm64_sys_ioctl+0x2c/0xbc
el0_svc_common.constprop.0+0x84/0x200
do_el0_svc+0x30/0xa0
el0_svc+0x18/0x50
el0_sync_handler+0x98/0x354
el0_sync+0x17c/0x180
raspberrypi-firmware soc:firmware: mbox_send_message returned -62
cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 18446744073709551554 (-34)